Explore Our Premium Livestock Solutions

Petrol 2 Inch High Flow Water Transfer Pump 7HP 212cc

The 2 inch water transfer pump is powered by a true commercial 7HP petrol engine. With a suction/discharge diameter of 50mm, or 2 inches, this petrol water pump has a maximum delivery lift of 30m and a maximum water displacement rate of 30,000 litre per hour. With the ability to draw water up to 7m in height.
The engine is a 7HP (212cc) 4-stroke, single cylinder OHV forced air-cooled petrol engine. 3.6L fuel tank, this water pump is ready for up to 2.6 hours at 3/4 load.

Key Features:
*Powered by Thornado 7HP Petrol Engine
*EPAIII certified engine – Reduce carbon footprint
*Max heads 30 metres
*Max flows 30,000 litres per hour
*Suction depth 7 metres
*2 inch Suction/Discharge Ports
*Anti-vibration design
*High-quality mechanical seal
*Rigid Mounted Cast Iron Volute and Cast Iron Impeller
*Heavy Duty Full Frame Protection
*Low oil alert installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
*12 Months Warranty

The Bromic Waterboy 3kW Pressure Controller offers complete control of household pumps through hassle-free automation, starting and ceasing water supply in response to demand.

Features

Fully weatherproof – IP65 rated housing
Large display panel
Heavy-duty 3.0kW controller
Compatible with any above ground or submersible pump
Supplied with electrical lead suitable fo use with any 10amp power outlet
Ideal for domestic, irrigation and agricultural applications
Warranty 2 years
Compatible with: 7575101, 7575100, 7575107, 7575200 and 7575113.

SPECIFICATIONS
Application: For use in domestic, irrigation and agricultural applications.
Warranty (Years): 2 Years Replacement Warranty
Power: 3kW
Current (A): 15
IP Rating:IP65
Supply Voltage (V):240
Max. Current (A):15
Max. Working Prssure (kPa):10
Cut-in Pressure (bar):1.5
Water Type:Clean
Pumping Capacity: 40L, 60L, 80L, 116L
Inlet Connection ( Connector ) M
Inlet Connection ( Thread Size ) 1"
Outlet Connection ( Connector ) M
Outlet Connection ( Thread Size ) 1"
Capacity (): 40, 60, 80

Bromic multi-stage pump teamed with high quality pressure controller

This Bromic Waterboy Multi-Stage Pump & Pressure Controller Kit is an economical water supply unit for domestic households pressure systems and gardens irrigation. The 116L multi-stage pump kit features a high-efficiency stainless steel pump with an automatic 3kW pressure controller to provide high-flow performance.

Features

Ideal for pumping clear water and non-aggressive liquids
Multi-stage pump with an automatic 3kW pressure controller
Quiet operation, ideal for low noise requirements
High efficiency and energy saving
Stainless steel impeller & chambers
6 stage jet pump
High pressure systems applications with quiet and reliable operation
Warranty 2 years

Specifications
Depth (mm)202
Application High pressure systems with quiet reliable operation.
Warranty (Years) 2 Years Replacement Warranty
Power 1.3kW
Current (A) 6.8
Max. Head (m) 58
Water Type Clean
Weight (kg) 18.28
Width (mm) 650
Height (mm) 275
Pumping Capacity 116L
Inlet Connection ( Connector ) M
Inlet Connection ( Thread Size ) 1 1/4"

Bromic’s 80L Waterboy Jet Pump is ideal for domestic household pressure systems and garden irrigation. This 80L Jet Pump is designed for use with Clean Water and is backed by a 2 Year replacement Warranty.

Features

Horizontal self-priming pump
Stainless steel housing
Ideal for pumping clear water
Economical and compact
Ideal for domestic, irrigation and agriculture applications
Warranty 2 years

Specifications
Application: Domestic households pressure systems and garden irrigation
Warranty (Years): 2 Years Replacement Warranty
Power: 1.0kW
Current (A) 6.2
Max. Head (m) 50
Rated Flow (m3/H) 3
Max. Flow Rate 3.0 m3/h
Water Type Clean
Pumping Capacity 80L
Inlet Connection ( Thread Size ) 1"
Inlet Connection ( Thread Type ) G
Outlet Connection ( Thread Size ) 1"
Outlet Connection ( Thread Type ) G

Bromic’s Waterboy Jet Pumps offer solutions for domestic household pressure systems and garden irrigation. The Bromic Waterboy 60L Jet Pump is powered by an electric motor that contains and drives an impeller/centrifugal pump. The impeller moves water, through the Jet Pump and increases the pressure of the water, to assist where high suction lift is required such as in double storey homes.

Features

Horizontal self-priming pump
Stainless steel housing
Ideal for pumping clear water
Economical and compact
Ideal for domestic, irrigation and agriculture applications
Warranty 2 years

Specifications
Application Domestic households pressure systems and garden irrigation.
Warranty (Years) 2 Years
Power 0.75kW
Current (A) 5.2
Max. Head (m) 45
Rated Flow (m3/H) 2.4
Max. Flow Rate 2.4m3/h
Water Type Clean
Pumping Capacity 60L
Inlet Connection ( Thread Size ) 1"
Inlet Connection ( Thread Type ) G
Outlet Connection ( Thread Size ) 1"
Outlet Connection ( Thread Type ) G

Petrol 2 Inch High Pressure Fire Fighting Pump Twin Impeller 7HP 212cc

This 2 inch firefighting pump isn’t just featured with a suction inlet of 50mm or 2 inches, but is also outfitted with 3 discharge outlets of 2 inch & 1.5 inches, performing a maximum water displacement rate of 18,000 litres per hour and its aspiration lift to 80m.

Fire Fighting Pump Key Features:
*Powered by THORNADO 7HP 4 Stroke OHV Petrol Engine
*EURO-5 emission certified engine – Reduce carbon footprint
*Twin Impeller design provides the versatility of high flow with strong pressure
*Rigid mounted cast iron volute and heavy duty full frame protection
*Big pump body for better priming capability
*Pump casing and impellers manufactured from quality corrosion resistant marine grade aluminium for long life
*3 ways discharge ports for easy installation with a choice for plumbing sizes
*Powder coated pump casing for added corrosion protection
*Toughened and durable hose fittings for corrosion resistance
*Low oil protection installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
*12 Months Warranty*

2 inch diesel fire fighting pump has an 80m total head, can draw water up to 8m in height, and can move up to 18,000 litres per hour. The external pump body is made of marine grade aluminium alloy and powder coated for added corrosion resistance. Our pump features a ceramic carbon mechanical seal for long life and a heavy duty steel frame that protects the pump and engine from all sides.

Diesel Fire Fighting Pump Key Features:
*Powered by 7HP Diesel engine with electric start
*2 inch self priming water pump
*Twin impeller design provides the versatility of high flow with strong pressure
*2 inch suction, 3 ways discharge ports for flexible applications
*Pump body and impeller are manufactured from marine grade alloy for long life
*Powder coated pump casing for added corrosion protection
*High-quality ceramic mechanical seal – very critical to water pump
*Heavy duty full frame protection
*Large 18Ah 12V Battery
*12 Months Warranty*

Petrol 1.5 Inch High Pressure Fire Fighting Pump Twin Impeller 7HP.

This Petrol 1.5 inch fire fighting pump not only has a suction inlet of 40mm or 1.5 inch, but it also has three discharge outlets of 1.5 inch and 1 inch, a maximum water displacement rate of 12,000 litres per hour, and the ability to draw water up to 7m in height. This pump’s twin impeller provides a strong delivery lift of up to 80m.

Key Features
*Powered by 7HP 4 Stroke OHV Petrol Engine
*EURO-5 emission certified engine – Reduce carbon footprint
*Twin Impeller design provides the versatility of high flow with strong pressure
*Rigid mounted cast iron volute and heavy duty full frame protection
*Big pump body for better priming capability
*Pump casing and impellers manufactured from quality corrosion resistant marine grade aluminium for long life
*3 ways discharge ports for easy installation with a choice for plumbing sizes
*Powder coated pump casing for added corrosion protection
*Toughened and durable hose fittings for corrosion resistance
*Low oil protection installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
*12 Months Warranty*

1" Petrol Compact Transfer Water Pump - 43cc 2-Stroke 15,000LPH
Equipped with a recoil start, this 2 stroke pump also features a 1 x 1" BSP outlet for high pressure and a 1" suction inlet, allowing you to transfer water from a dam or water hole with ease. With a maximum lift of 35M,
The pump also features a single impeller, an alloy pump and housing, and weighs in at just 7kg,

43cc 2 stroke single cylinder engine:
*Recoil start
*1 x 1" BSP outlet for high pressure
*1" inlet
*Single impellor
*Alloy pump and housing for durability
*Lightweight design, only 7kg for portability
*Max 35M lift for accessing distant water sources

Petrol 1.5 Inch Highbanker Water Pump 2HP 4 Stroke OHV

The new 1.5 inch 2HP 4 Stroke SELF PRIMING highbanker water pump have been redesign and upgraded from our previous model for improved durability and service life. This water pump can quickly transfer clear water up to 14,000 L/hour. The pump is fitted with a 2HP petrol engine that features durable cast iron cylinder that withstand wear and abuse, fuel shut off for safe transport and fuel saving overhead valves for a cooler, cleaner performance.

Thornado 1.5 Inch Highbanker Water Pump Key Features:
*Powered by 2HP, 4 Stroke Engine
*14,000L/hour
*1.5 Inch Inlet Port
*1.5 Inch Outlet Port
*Low oil alert installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
*12 Months Australia Warranty

Petrol 3 Inch High Flow Water Transfer Pump 7HP 212cc

This 3 inch water transfer pump not only increases the required power but also features a new design of the pump impeller and pump body thickness. This 7HP petrol engine powers the 3 inch water pump. With a suction/discharge diameter of 80mm (3 inches), this water pump has a maximum delivery lift of 30m and a maximum water displacement rate of 60,000 litres per hour. With the ability to draw water up to 7m in height.

3 Inch Petrol Water Pump Key Features:
*Powered by Thornado 7HP Petrol Engine
*EPA III certified engine – Reduce carbon footprint
*Max heads 30 metres
*Max flows 60,000 litres per hour
*Suction depth 7 metres
*3 inch Suction/Discharge Ports
*Anti-vibration design
*High-quality mechanical seal
*Rigid Mounted Cast Iron Volute and Cast Iron Impeller
*Heavy Duty Full Frame Protection
*Low oil alert installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
*12 Months Warranty

Tipper
This trailer feature tipping function. 2 quick release safety pins and the trailer tips on the rear end. Definitely a handy feature!

8×5 Heavy Duty Trailer - No Cage - Payload of 1,000 KG MAX
Weight: 1400kg ATM (Aggregate Trailer Mass)

Euro Float, 2 Horse Straight Load.
Great float to hire for transporting horses and mini ponies.
Fitted with Water tank and fold up beds, you can hire this float for weekend events.

As per Qld Law, For a trailer with an electric brake(s), an electric brake controller must be fitted on the towing vehicle. We fit out all our trailers with ElecBrakes Bluetooth units. to make it easier for you to hire our trailers.


Inclusions:
Break away safety unit
60 litre water tank, pump and tap
2 Fold up beds in the bay area
1 x side BBQ/Storage box
Aluminium checker plate
Equine Rubber Matting
Pop up internal air vents
Fully padded rump bars
Tie hitches

Heavy Duty Tilt Tray, Car Trailer.
Tows fantastic.
Can be used to transport vehicles or even large bulky products.

As per Qld Law, For a trailer with an electric brake(s), an electric brake controller must be fitted on the towing vehicle. We fit out all our trailers with ElecBrakes Bluetooth units. to make it easier for you to hire our trailers.

ATM: 3500kg
Tare: 1000kg
Payload: 2500kg
Manual: 3T Winch (Rolling)
Deck Size: 5m x 2m(16.4×6.6ft)
Floor: Checker Plate Floor
Tie down points – several on each side
Suspension: 4.2T Capacity 7 Leaf 7mm Springs With Rocker Roller Suspension
Coupling: 50mm 3500kg
Ramps: 2000mm Length,300mm Width, under body slide style
Tilt Body 8 Approach angle low vehicle loading
Suitable for 4×4 Car/Sedan or Racing Car/Bobcat/Machinery/Scissor Lift (*Please note no suitable for all models)

10 x 6 ft Cattle Crate Trailer – ATM 3500kg
Fantastic trailer for livestock transport. This is truly an excellent livestock transport package which provides great versatility.

As per Qld Law, For a trailer with an electric brake(s), an electric brake controller must be fitted on the towing vehicle. We fit out all our trailers with ElecBrakes Bluetooth units. to make it easier for you to hire our trailers.

The sleek design, slotted sides, and open-air top ensure ample ventilation, reducing discomfort for your livestock.
The slotted sides minimize dust and other irritants, ensuring your cattle arrive safe and in good condition.
Trailer floor is massively reinforced with a close web construction of box section steel members. Fitted with full floor equine rubber matting.

Details:
*Rear Gate with Slide/Drop Down Ramp.
*Front and Rear Fold Down Gates (Removable)
*Mesh Re-moveable Door Inside of Cattle Crate with Variable Positions.
*Inner Box Dimensions: 3000mm x 1800mm
*Tie Down Rails all Around
*Flat 7 Pin Plug - We offer adapters to suit your vehicle.
*Total Trailer Height: 2.57m
*ATM: 3500kg
*Tare: 1460kg
*Capacity: 2200kg (Payload)

Our range of pumps offers a complete solution for the transfer of water. Waterboy™ rainwater harvesting systems offer complete solutions for effective management of water, with the ability to automatically supplement supply with mains water when needed for low-maintenance operation.

Waterboy™ pump systems offer complete solutions including Clean-Water Jet Pumps, Multi-Stage Pumps, and Greywater Jet Pumps available in 40L, 60L and 80L configurations.

The diverse range offers both submerged pumps and external pump options in versatile configurations to fulfil the needs of all rainwater harvesting systems, big or small. Also included in our range of pumps are circulation pumps and submersible pumps, for both dirty and potable water.

When it comes to fighting fires, having a reliable fire fighting pump is essential. There are many different types of fire fighting and water transfer pumps. Choosing the right water pump for your needs is important.

We stock a select range of high quality water transfer and Fire Fighting water pumps based of the required outlet size and selectable pressures.

1.5 inch 7HP fire fighting pump inlet of 40mm or 1.5 inch, three discharge outlets of 1.5 inch and 1 inch, a maximum water displacement rate of 12,000 litres per hour, and the ability to draw water up to 7m in height. Twin impeller, lift of up to 80m.

2 inch 7HP firefighting pump inlet of 50mm or 2 inches, 3 discharge outlets of 2 inch & 1.5 inches, water displacement rate of 18,000 litres per hour and lift to 80m.

2 inch petrol water transfer pump. 7HP petrol engine. Suction/discharge diameter of 50mm, or 2 inches. Maximum delivery lift of 30m and a maximum water displacement rate of 30,000 litre per hour. With the ability to draw water up to 7m in height,

3 inch water transfer pump, 7HP petrol engine powers the 3 inch water pump. Suction/discharge diameter of 80mm. maximum delivery lift of 30m.

These dog enclosures are perfect for keeping your pets safe and secure. Crafted from high-quality materials, they offer ample space for your dogs to move around comfortably while being protected from external elements.

Dog panels: Available in 3mm or heavy duty 4mm mesh.
Panel sizes are standard: 2.4 mt wide x 1.8 mt high, or small: 1.8 mtr wide x 1.1 mt high
We supply these by the panel so you can design your own structures and designs.

Our hay feeders are built to withstand the rigors of daily use while minimizing waste. With a robust design, they provide easy access for your livestock and help maintain a clean feeding area.

Our round yards are designed for optimal livestock handling and safety. Constructed from high-quality materials, they offer durability and stability, ensuring your animals are well-contained and secure.
32mm round 6 rail panels, which connect via the two drop pins each side. Height 1.8 mt x width 2.1 mt.
Gates provide an easy access point to enter the round yard. Height 2.2 mt x 1.8 mt wide

We sell these by the panel so you can build to size.
Pins included.